Preparation; Mouse Connection; Printer Connection; Power Link Connection - VTech Power Zone User Manual

PREPARATION

MOUSE CONNECTION

1. Make sure the unit is OFF.
2. Locate the mouse jack on the back of the unit.
3. Plug the mouse into the unit's mouse jack.
4. Turn the unit ON.

PRINTER CONNECTION

1. Make sure both the POWER ZONE
2. Locate the printer port on the back of the POWER ZONE
3. Insert the printer plug into the printer port.
4. Turn ON the POWER ZONE
Please refer to the printer list included in the packaging for the print drivers that POWER
TM supports.
ZONE
VTECH POWER LINK
1. Make sure the POWER ZONE
2. Locate the printer port on the back of the POWER ZONE
3. Insert the VTECH POWER LINK
4. Connect the VTECH Power Link
the user's manual of the VTECH POWER LINK
to the personal computer.
5. Turn ON the computer.
6. Turn ON the POWER ZONE
The Power Link
NOTE:

POWER SOURCE

The POWER ZONE
the standard 9V

BATTERY INSTALLATION

1. Make sure the unit is OFF.
2. Locate the battery cover on the back of the unit.
3. Open the battery cover.
4. Insert 4 "C" batteries, as illustrated.
DO NOT USE RECHARGEABLE BATTERIES in this unit.
5. Close the battery cover.
TM learning product and the printer are OFF.
TM unit, then turn ON the printer.
TM
CONNECTION
TM learning product is OFF.
TM connector into the printer port.
unit to the personal computer. Please refer to
TM
learning product.
TM
TM is sold seperately.
TM
learning product can be operated by using 4 "C" size batteries or
300mA AC center-positive
TM
TM
TM for information regarding connection
adaptor.
2
learning toy.
learning product.