Preparation; Mouse Connection; Printer Connection; Power Source - VTech Power Zone 2000 User Manual

PREPARATION

MOUSE CONNECTION

1. Make sure the unit is turned OFF.
2. Locate the mouse jack on the back of the keyboard.
3. Plug the mouse into the unit's mouse jack.
4. Turn the unit ON.

PRINTER CONNECTION

1. Make sure both the VTECH
are turned OFF.
2. Locate the printer port on the right side of the VTECH
learning aid.
3. Connect the printer plug to the printer port.
4. Turn ON the VTECH
Please refer to Printer Setup for the list of printers that the VTECH
Zone™ 2000 learning aid supports.

POWER SOURCE

The VTECH ® Power Zone™ 2000 learning aid can be operated by using 4 "C"
size batteries or a 14.5V 4.5VA center-positive

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit and open it.
3. Insert 4 "C" batteries as illustrated.
DO NOT
BATTERIES in this unit.
4. Close the battery cover.
® Power Zone™ 2000 learning aid and the printer
® Power Zone™ 2000 learning aid and the printer.
USE RECHARGEABLE
2
® Power Zone™ 2000
®
Power
adaptor.