Table of Contents
Advertisement
MOUSE CONNECTION
DETACHING THE MOUSE FROM THE MAIN UNIT.
Please note that the mouse should not be detached completely from the unit. It
has a retractable cord and is intended to be used attached to the unit.
1. Locate the mouse on the back of the unit.
2. Lift the back end of the mouse away from the main unit.
3. Gently pull the mouse cord out until fully extended.
RETURNING THE MOUSE TO THE MAIN UNIT
1. Place mouse cord carefully back inside the main unit.
2. Click the mouse securely back into the storage area.
MOUSE OVERVIEW
Once the mouse is free from the unit you may move the mouse cursor around the
screen freely. The mouse has a roller ball in it and therefore should be used on a
flat surface. A mouse pad is ideal, but you may also try a piece of paper, a notebook
or a magazine. A clean flat surface is important to be able to use your mouse effectively.
Your mouse is very easy to use. To use the mouse, push it in the direction that
you would like the pointer
right side of the screen, push the mouse to the right. To move the pointer to the
left side of the screen, push the mouse to the left. To move the pointer to the top
of the screen, push the mouse away from you. To move the pointer to the bottom
of the screen, pull the mouse towards you.
MOUSE MAINTENANCE
To clean the mouse, you need to open the cover on the
bottom of the mouse by using a screwdriver. Twisting in
the direction of the arrows will release the cover. Once
the cover is removed, the mouse ball should be taken out
and the contents inside the mouse should be cleaned with
a dry cloth. The mouse ball should also be cleaned with
a dry cloth. Once you have finished cleaning the mouse,
place the mouse ball back into the mouse and screw the
cover back onto the mouse.
VOLUME SWITCH
on the screen to move. To move the pointer to the
Adjust the volume by sliding the Volume Switch to the right to
raise the volume and to the left to lower the volume.
3
Advertisement
Table of Contents
