Earphone Connection; Mouse Connection - VTech Power Vision User Manual

3. Insert the adaptor plug into the unit's adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: If the unit suddenly stops working or the sound seems weak, it may be the
result of the adaptor connection. Turn the unit off and unplug the adaptor from
the unit for 15 seconds. Next, plug the adaptor back in and turn the unit on.
If the problem continues, it may be the result of the adaptor's wiring or the
unit. Please call our Consumer Services Department at 1-800-521-2010 in the
U.S. or 1-800-267-7377 in Canada.
Do not leave the adaptor plugged in for long periods of time if the unit is not in use.

EARPHONE CONNECTION

Use earphones with an appropriate earphone plug.
1. Make sure the unit is OFF.
2. Locate the earphone jack on the left side of the unit.
3. Insert the earphone plug into the unit's earphone jack.
4. Turn the unit ON.
After finishing the above procedure, check if the earphones are working. If not, repeat
the above procedure.
NOTE: If the sound becomes weak or the unit suddenly stops working, turn the unit
off for 2 minutes, then turn it back on. If the problem persists it may be caused
by weak batteries. Please install new set of batteries and try the unit again.

MOUSE CONNECTION

TO CONNECT THE MOUSE
1. Turn OFF your VTECH
2. Plug the connector at the end of the mouse cable into the mouse jack at the back
of the unit.
3. Turn ON the VTECH
to play. You can choose either Adventure Mode or Normal Mode. When the activity
starts, you may use the keyboard and/or the mouse to play the game.
®
Power Vision unit.
®
Power Vision unit. After the opening animation, select a mode
3