Battery Installation; Cursor Control - VTech Knowledge Key PC User Manual

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit
and open it.
3. Insert 4 "AA" batteries (UM-3/LR6) as illustrated.
(The use of new, alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the correct polarity (+, –) signs to avoid leakage.
• Do not use rechargeable batteries.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove the batteries from the unit when it will not be used for an extended period
of time.
• Do not dispose of batteries in fire.
• Do not short-circuit the supply terminals.
• Do not attempt to recharge ordinary batteries.
NOTE: If for some reason the unit stops working, please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Press and hold the ON button for 3 minutes.
4. Replace the batteries.
5. Turn the unit ON.
If the problem persists, please call our Consumer Services Department at 1-800-521-
2010 in the U.S., 1-800-267-7377 in Canada.

CURSOR CONTROL

The cursor control is designed especially for the
Knowledge Key™ PC learning toy. To remove the
cursor control from the keyboard, lift the front end. To
attach it to the keyboard, click the mouse securely
back into the storage area.
The unit will now be ready to play again.
2