Rack-Mounting The Chassis - Cisco IAD2435-8FXS Quick Start Manual

Rack-Mounting the Chassis

To rack-mount the chassis, follow these steps:
Choose one of the methods shown in Figure 8, Figure 9, Figure 10, and Figure 11, as appropriate, and attach the long
Step 1
side of the mounting brackets to the chassis, as shown.
Make sure to use the correct screws for this mounting option (see Table 1 on page 11).
Caution
Screws are included for attaching the brackets to the chassis, but not for installing the chassis in a rack or on
Note
a wall. You must purchase four additional machine screws to install the chassis in a rack. Use the screw size
required by your rack.
Cisco IAD2435-8FXS provides for back-panel rack-mounting only, as shown in Figure 11.
Caution
Figure 8 19-Inch Rack-Mounting with Front Panel Forward
Figure 9 19-Inch Rack-Mounting with Back Panel Forward
Figure 10 Telco 19-Inch Rack-Mounting with Back Panel Forward
12
C IS C O IA
D 24 00