Table 6
Workstation requirements for QuickTools
Operating systems
Memory
Processor
Internet Browser
Hardware
1. You must disable caching of temporary files and applets in Java to prevent conflicts with past or future versions of
QuickTools. Furthermore, you may need to disable caching again after upgrading Java.
Telnet workstations require an RJ-45 Ethernet port or an RS-232 serial port and an operating system with a
Telnet client.
Switch power requirements
Power requirements are 1 Amp at 100 VAC or 0.5 A at 240 VAC.
Environmental conditions
Consider the factors that affect the climate in your facility such as equipment heat dissipation and
ventilation. The switch requires the following operating conditions:
•
Operating temperature range: 0°–40°C (0°–104°F)
•
Relative humidity: 15–80%, non-condensing
Installing a switch
Unpack the switch and accessories. The 8/20q Fibre Channel Switch product is shipped with the following
components
•
One Read-Me-First document
•
One End User License Agreement (EULA)
•
HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit quick start installation instructions
•
HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions
•
One HP StorageWorks Simple SAN Connection Manager software CD
•
One HP StorageWorks 8/20q Fibre Channel Switch
•
One HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit
•
One standard power cord
•
One HP Power Distribution Unit (PDU) power cable
•
One serial cable
•
Four ahesive rubber feet
For the latest product information, including firmware, documentation, and supported SAN configurations,
visit the following HP web site: http://www.hp.com/go/8Gb-SSC.
28
Windows 2003 and XP SP1/SP2
Red Hat Enterprise Linux 3, 4
SUSE Linux Enterprise Server 9 and 10
512 MB
2 GHz or faster
Microsoft Internet Explorer 5.0 or later
Netscape Navigator 6.0 and later
Mozilla 1.5 and later
Firefox 1.0 and later
Java Runtime Environment 1.4.2 or higher
RJ-45 Ethernet port
1