HP StorageWorks 8/20q Installation And Reference Manual page 83

N-Port ID Virtualization
(NPIV)
Pending firmware
Port binding
Power-on self test
(POST)
Principal switch
QuickTools
Remote Authentication
Dial-in Service
(RADIUS)
Secure shell (SSH)
Secure socket layer
(SSL)
Security set
Simple Network
Management Protocol
(SNMP)
Simple SAN
Connection Manager
(SSCM)
Small form-factor
pluggable (SFP)
Storage Management
Initiative–Specification
(SMI-S)
System Fault LED
Target
TR_Port
User account
User account security
Workstation
Worldwide Name
(WWN)
Zone
Zoneset
Zoning database
A Fibre Channel facility allowing multiple N_Port IDs to share a single physical N_Port.
The firmware image that will be activated upon the next switch reset.
An authorization method that defines a list of device WWNs that can login to a switch port.
See Worldwide Name (WWN).
Diagnostics that the switch performs at start up.
The switch in the fabric that manages domain ID assignments. See
A browser-based switch management application that resides in the switch firmware.
A service that supports the remote authentication of user and device logins to a switch.
A protocol that secures connections to the switch for the command line interface.
A protocol that secures connections to the switch for QuickTools, Enterprise Fabric
Management Suite, and SMI-S.
A set of up to three groups containing no more than one of each group type: ISL, Port, or
MS. The active security set defines the device security for a switch. See Group.
An application protocol that manages and monitors network communications and
functions. It also controls the Management Information Base (MIB). See
Information Base (MIB).
A management application that provides basic automated configuration and management
of switches, HBAs, and storage devices.
A transceiver device, smaller than a GigaBit interface converter, that plugs into the Fibre
Channel port.
A standard that provides for the management of the switch through third-party management
applications.
A switch LED that indicates that a fault exists in the switch firmware or hardware.
A storage device that responds to an initiator device.
Transparent routing port. A port type that uses the Fibre Channel industry standard NPIV to
provide access to devices on a remote HP StorageWorks B-series or C-series fabric.
An object stored on a switch that consists of an account name, password, authority level,
and expiration date.
A component of fabric security that provides for the administration and authentication of
account names, passwords, expiration dates, and authority level.
PC or Linux workstation that manages the switch using QuickTools or the command line
interface (CLI).
A unique 64-bit address assigned to a device by the device manufacturer.
A set of ports or devices grouped together to control the exchange of information.
A set of zones grouped together. The active zoneset defines the zoning for a fabric. See
Zone.
The set of zonesets, zones, and aliases stored on a switch. See Alias, Zone, and Zoneset.
HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide
Domain ID.
Management
83