6-10.4. Copying The Recorded Data During Replaying - Clover CDR-0850 Instruction Manual

Instruction Manual
Stand-alone DVR

6-10.4. Copying the recorded data during replaying

The system, CDR0850 allows users to copy the recorded data during replaying.
▫ Start replaying (See section 6-9).
▫ Right-click on the replaying screen, and the COPY DATA screen will be displayed (See
Fig.6-43).
▫ To set the starting time and date to copy, select the values (year/month/date window
and hour/minute/second) on the COPY DATA window by clicking the mouse, change the
values with the mouse's wheel and click the mouse again on the changed values to
complete.
▫ Select each of channels (1 through 8 in red) or "A" in black for all the channels on the
COPY DATA window, and click on the SELECTED button to save.
▫ To set the ending time and date to copy, right-click on the replaying screen again, and
the COPY DATA window that contains end time for copying will be displayed (See Fig.6-
44). Set the ending time and date to copy as described above.
▫ To select the COPY MODE, click on the GO TO COPY button (See Fig.6-44), and the
COPY window (See Fig.6-38) will be displayed. The time and date (starting time and
ending time) to copy can be changed on the COPY window as well (See section 6-10.2).
[Fig.6-43 Start Copy Time Setup window]
68