7-6.9. Recording By Motion Detection - Clover CDR-0850 Instruction Manual

Instruction Manual
Stand-alone DVR

7-6.9. Recording by Motion Detection

When the menu of motion properly setup (See section 7-6.3 on page 101 for all the
channels and this section for each of the channels) and detects motion of objects, the
system begins to record automatically. The recording icon on the MENU bar should be
selected in this recording mode. If not, it won't be recording.
▫ Click the mouse on the
the MOTION menu will be displayed on the screen as shown in Fig.7-70.
▫ Click the (EXIT) button to return to the RECORD menu.
▫ ON/OFF
The system will start to record when MOTION is detected and the ON is selected in the
MOTION menu by clicking the mouse. If the OFF is selected, the system won't be
recording.
button for each of the channels in the RECORD menu and
[Fig.7-70 MOTION menu]
[Fig.7-71 MOTION ON/OFF button]
106