Clover CDR-0850 Instruction Manual page 107

▫ Pre-Alarm Time Setup
Allows you to record a section of video just prior to Motion or Sensor activation. Click the
mouse on the PRE in the MOTION menu and choose one of the values among 0, 1, 2, 3, 4
and 5 seconds with the mouse's wheel, and then click it to save.
▫ Motion Hold Time Setup
The system continues recording for the MOTION HOLD TIME and finishes the recording.
Click the mouse on the HOLD in the MOTION menu and choose one of the values among
1 through 30 seconds with the mouse's wheel, and then click it to save.
[Fig.7-72 Pre-Record Time setup button]
[Fig.7-73 Pre-Alarm Time Setup pop-up window]
Fig. 7-74 Hold-Record Time Setup button]
107
7. Setup