Clover CDR-0850 Instruction Manual page 116

Instruction Manual
Stand-alone DVR
▫ Alarm Hold Time Setup
The system continues recording for the Alarm HOLD TIME and finishes the recording. Click
the mouse on the HOLD in the SENSOR menu and choose one of the values among 1
through 30 seconds with the mouse's wheel, and then click it to save.
▫ Spot Setup
If the "ON" is selected by clicking the mouse on the SPOT button in the SENSOR menu, a
full screen will display when a motion is detected. If the "OFF" is selected, the full screen
won't be displayed even though alarm is detected.
[Fig.7-92 Alarm Hold Time Setup button]
[Fig.7-93 Spot Setup button]
116