6-8.3. Timer Recording - Clover CDR-0850 Instruction Manual

Instruction Manual
Stand-alone DVR
The MOTION (
in this recording mode.
▫ Press the RECORD button on the front panel or click the RECORD icon on the MENU bar.

6-8.3. Timer Recording

▫ Click the SETUP icon on the MENU bar in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫ Select the TIMER RECORDING (
and the TIMER RECORDING (
the same time by clicking the ALL (
clicking the TIMER RECORDING (
The MOTION (
in this recording mode.
▫ Choose one among WEEKDAY, SATURDAY and SUNDAY in the TIMER menu by clicking
the mouse on (
by repeatedly clicking the mouse.
▫ Select the Starting Time and Ending Time by clicking the mouse, change the values with
the mouse's wheel and click the mouse again on the changed values to complete as
shown in Fig.6-27. The recording time can be set in military hour mode (24hour).
▫ Press the RECORD button on the front panel or click the RECORD icon on the MENU bar.
) and SENSOR (
[Fig.6-24 Manual Event Recording setup]
) between the MANUAL RECORDING (
) as shown in Fig.6-25. All channels can be set at
) on the CAM 1 through CAM 8.
) and SENSOR (
) that turns to (
[Fig.6-25 Timer Recording setup]
54
) as shown in Fig.6-24 should be turned ON
) or each of the channels can be set by
) as shown in Fig.6-25 should be turned OFF
). You can choose the value
)
or