Intercom - AT&T E6001 User Manual

TONE TONE
MUTE REDIAL MUTE REDIAL
DELETE PAUSE DELETE PAUSE
INTERCOM TO:
NOTE: Press OFF/
or MUTE/
DELETE
porarily silence the inter
com ringer.
Telephone operation

Intercom

Use the intercom feature for conversations between
handsets.
1. Press INT. The screen of the originating handset
will show INTERCOM TO:.
2. Enter the handset number of the destination
handset. The display will show CALLING HANDSET
X. The destination handset will ring, and its
screen will show HANDSET X IS CALLING.
NOTES:
• Before the intercom call is answered, you can cancel the
intercom call by pressing
• If the destination handset is not answered within 100
seconds or if it is in the directory or call log mode, or out
of range, the originating handset will show the message
UNABLE TO CALL TRY AGAIN.
3. On the ringing destination handset, press INT,
PHONE
key (0-9, * or #) to answer the intercom call.
CLEAR
to tem
To end the intercom call:
• Press
-OR-
• Place either handset in the charger or telephone
base.
Handling incoming calls
The telephone will beep if there is an outside call
during an intercom conversation. You can either:
• Press
and answer the incoming call.
-OR-
• Press INT or
intercom connection without answering the
incoming call. The incoming call will continue to
ring.
OFF/
SPEAKER, or any dial pad
,
/FLASH
or
OFF/ INT
CLEAR
PHONE
/FLASH
OFF
/CLEAR
17
or INT.
CLEAR
on either handset.
to end the intercom call
to disconnect the