Table of Contents
Advertisement
9355_book_1ATT
7/12/99
FEATURE SETUP
Caller ID Feature Setup
Programming Home and Local Area Codes
Your "home area code" is the area code from which you are dialing.
Numbers called within your home area code do not require you to dial a
"1" or the area code before dialing the telephone number. "Local area
codes" are area codes that require no "1" before dialing the telephone
number; however, the area code must be dialed.
Always program your home area code, and, if you need them, your local area
codes (up to four). Programming these area codes will change how
numbers are displayed in the call history, and will allow for correct
operation of the Display Dial feature (see page 38).
1
Make sure the
2
Press U >.
3
Use the softkey to select SETUP.
4
Select DONE until the screen displays AREA CODE 1.
5
Use the keypad to enter your home area code.
6
Select CODE 2 to reach AREA CODE 2 (the screen displays any
current local area code stored here). Use the keypad to enter a
three-digit local area code.
7
Continue as in Step 4 for area codes 3, 4 and 5 as needed
— OR —
Select DONE to move to the next feature (begin at Step 5)
— OR —
Press U to exit.
Turning Off Caller ID with Call Waiting
You must subscribe to Caller ID with Call Waiting in order for this feature
to work. If you don't have Caller ID with Call Waiting service, you should
turn this feature off (the phone comes with the feature on).
1
Make sure the
2
Press U >.
3
Use the softkey to select SETUP.
4
Select DONE until the screen displays CIDCW: ON.
5
Select CHANGE. The screen displays CIDCW: OFF.
6
Select DONE to move to the next feature (begin at Step 5)
— OR —
Press U to exit.
8
2:25 PM
Page 8
is not displayed.
is not displayed.
Advertisement
Table of Contents
