Dell PowerEdge 6850 Hardware Installation Manual page 20

Figure 1-7. Installing the System in the Rack
1 system locking mechanism
4 Engage the back shoulder screws in the slot just behind the slide-release
latch, followed by the middle and front shoulder screws.
5 Push the system inward on the slide assemblies until the system-locking
mechanism clicks into place, locking the slide to the system
(see Figure 1-7).
6 Pull up on the slide-release latches and push the system into the rack.
7 Tighten the thumbscrews on the rack front panel.
18
Dell™ Rack Installation Guide
1