Dell PowerEdge 6600 Installation Manual page 5

Memory installation guidelines (.pdf)

Hide thumbs Also See for PowerEdge 6600:

Available languages

F i g u r e 1 - 1 .

R e m o v i n g a n d R e p l a c i n g t h e M i c r o p r o c e s s o r C o v e r

heat sink

tray handle

release levers (2)

CAUTION: The microprocessor and heat sink can become extremely hot. Be sure

the microprocessor has had sufficient time to cool before handling.

NOTICE: Never remove the heat sink from a microprocessor unless you intend to remove the

microprocessor. The heat sink is necessary to maintain proper thermal conditions.

NOTICE: After removing the heat sink, it should be placed upside down on a flat surface to

prevent the thermal interface material from being damaged or contaminated.

Remove the heat sink (see Figure 1-1).

Pull the socket release lever up until the microprocessor is released (see Figure 1-2).

side release lever

front release lever

cover retention tabs (2)

CPU1

microprocessor

tray handles (2)

M i c r o p r o c e s s o r U p g r a d e Installation Guide

microprocessor

cover

VRM1

1-3