Fujitsu PA03360-B525 Operator's Manual page 94

■ [Filename format] button
HINT
76
Specify the name of image files to save.
When you click the [File name format] button, the following dialog box appears.
You can select one of three settings below.
• "Date and time (Use Operating System Setting)"
Files are named according to the settings of the operating system of your personal
computer.
Characters inappropriate for file names (/;+,*"<>|), if used, will be replaced with
"-" (under bar).
• "Date and time (yyyyMMddHHmmss)"
The date and time are used for file names.
Example:
A file saved at 19:00:50 on February 27th, 2007, in PDF format will be
20070227190050.pdf
• "Custom File Name"
A file name is the combination of a text string typed in the "File Name" field and a
number of digits specified in the "Counter" drop-down list.
(An example name in each format is displayed at the bottom of the dialog box
when you select the format.)
About "Counter"
•
When no file with a name specified in the "File Name" field exists in the save
folder (specified on the [Save] tab), a suffix number combined will be "1" ("001"
if 3 is selected in the "Counter" drop-down list). The number increases in
increments of 1 every time a new file is saved.
•
When other files with a name specified in the "File Name" field exist in the
save folder, a number combined will be the smallest available number.
Example: When files, Scan01.pdf, Scan03.pdf, and Scan04.pdf, exist in the
same folder, the file you save next will be Scan02.pdf, and then Scan05.pdf,
Scan06.pdf, Scan07.pdf...as long as you use the same "File Name."
•
When the specified number of digits is exceeded (for example, when saving
the 100th file with two digits specified), the number of digits increases by one.
Upon clicking the [OK] button, specified settings take effect.
(An example file name in the format you select is displayed under the [Filename
format] button.)