Fujitsu PA03360-B525 Operator's Manual page 69

3. Adjust the side guides to the document width.
Move the side guides so that there is no gap between the document edge and side guide on
both sides. Doing so can eliminate skewing of the document during scanning.
Document
When you use the stacker, scanned document sheets are stacked on the
HINT
stacker in the collated order when they have passed through the ScanSnap.
Use the stacker as described below.
1. Pull out the stacker toward you.
2. Extend the stacker.
Stacker
ScanSnap S510 Operator's Guide
3.3 Loading Documents
Side guide
51
3