Table of Contents
Advertisement
32
Care and Cleaning
Repmacin 9 LED Lights (s÷ ÷ot mode s)
Both the freezer and fresh food compartments of your
refrigerator include LED lights. Always use Electrolux
parts for replacement.
To replace LED Lights:
1
Unplug your refrigerator's power cord.
2
Remove light cover by pushing up and out.
3
Hold the LED cover with one hand and pull the
connector with the other hand while pressing the
connector latch.
4
Replace LED light and snap in place assuring the
light is facing in toward the unit (inside fresh food
and freezer) or facing outward on bottom of fresh
food doors.
CAUTION
Wear gloves when replacing
incandescent
light
bulbs to avoid getting cut.
To replace light bulbs:
1
Unplug your refrigerator's power cord.
2 Wear protective gloves,
3
Remove light cover, if necessary.
4
Unscrew and replace old bulb with an appliance
bulb of the same type and wattage (normally 40
watts).
5
Replace light cover, if necessary.
6
Plug in the refrigerator's power cord.
LED Light Removal
LED Light Harness Removal
_
NOTE
LED lights are in series so if one is bad or unplugged,
several lights may not light up.
Replacing
Light Bulbs (s÷ oot mode s)
Both the freezer and fresh food compartments of your
refrigerator include incandescent light bulbs that will
need replacing from time-to-time. Some lights have
covers that need to be removed before replacing
the bulbs. Always use bulbs that are designed for
appliance lighting.
Light
Light Cover
Bulb
Refrigerator Light
LightSocket
Located In Upper
_
Freezer _n
UghtBulb//_-/_.._-.. "t4_
Freezer Light
Ordering Replacement
LED Lights
Order new LEDs by calling 877-808-4195, online at
www.electrohxappliances.com,
or through the dealer
where you bought the refrigerator.
Here is the product
number to request when ordering:
LED Light, Part #241891101
Incandescent
Lights (40-watt bulb), Part
#5305514148
Advertisement
Table of Contents
