Table of Contents
Advertisement
installation
7'
To level the cabinet using the front rollers (select
models):
1
Slightly open freezer drawer. Lift the left side
of the toe grille and gently pull forward (see
illustration).
2
Lift the right side of the toe grille and gently pull
forward to remove toe grille (see illustration).
5 After unit is leveled, lower anti-tip leg until it
contacts the floor.
3
4
Close the drawer and use a flat-blade screwdriver
or %-inch socket wrench to raise or lower the
front rollers,
Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.
Paise
Raise
Anti-tip
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator stable. DO NOT use the anti-tip
leg to level the refrigerator.
6
Replace the toe grille by fitting it into place,
Advertisement
Table of Contents
