Using The Remote Control; Available Range Of The Remote Control; Inserting The Batteries - Sharp PG-M20S - Notevision SVGA DLP Projector Operation Manual

Notevision series
Hide thumbs Also See for PG-M20S - Notevision SVGA DLP Projector:
Table of Contents

Advertisement

Using the Remote Control

Available Range of the Remote Control

I The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
Be sure not to drop, expose to moisture or high temperature.
The remote control may malfunction under a fluorescent lamp.
Under that circumstance, move the projector away from the fluo-
rescent lamp.

Inserting the Batteries

The batteries (two R-03 batteries ("AAA" size,
UM/SUM-4, HP-16 or similar)) are included in
the package.
1
Slide the cover in the direction
of the arrow to open it.
2
Insert the included batteries.
Insert the batteries making sure the
polarities correctly match the
marks inside the battery compart-
ment.
3
Slide the cover in the direction
of the arrow to close it.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
Insert the batteries making sure the polarities correctly match the
ment.
Batteries of different types have different properties, therefore do not mix batteries of different types.
Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove
them using a cloth.
The batteries included with this projector may be exhausted over a short period, depending on how they are
kept. Be sure to replace them as soon as possible with new batteries.
Remove the batteries from the remote control if you will not be using the remote control for a long time.
and
30
30
Signal
transmitter
Remote control
and
marks inside the battery compart-
Remote
control
45
sensor
23' (7 m)
-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pg-m20sl

Table of Contents