Menu Off Command; Display Clear Command; Brightness + Command; Image (Toggle) Command - Canon LV-S4 Specification

SERIAL FUNCTIONAL SPECIFICATION

7.24. Menu OFF Command

Command
Detail
Response

7.25. Display Clear Command

Command
Detail
Response

7.26. Brightness + Command

Command
Detail
Response
7.27. Brightness - Command
Command
Detail
Response

7.28. Image (Toggle) Command

Command
Detail
Response
7.29. ON Start Enable Command
Command
Detail
Response
"C1D" [CR]
Clear Menu of On Screen Display
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C1E" [CR]
Clear the On Screen Display
Clear the On screen Display unconditionally
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C20" [CR]
Brightness of user control +1
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C21" [CR]
Brightness of user control -1
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C27" [CR]
Switch Image setting status.
This command works the same as the remote control's "Image" button.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C28" [CR]
Set to Power ON Start
This status is stored in EEPROM, so even if turning off and on..
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
Page 10 of 18