Starting The Firmware Updater - Konica Minolta magicolor 1650EN Firmware Update Manual

Starting the Firmware Updater

CAUTION
You must have administrator privileges in order to update the firmware.
CAUTION
Before starting the firmware updater, turn on the printer, and make sure
that it is correctly connected.
CAUTION
When the firmware is updated, the printer control panel settings may
return to their defaults. Before starting the firmware updater, be sure to
print the configuration page to check the settings. For details on
printing the configuration page, refer to the printer's User's Guide.
CAUTION
Do not perform any of the following operations while updating the
firmware.
– Turn off the printer.
– Turn off the computer running the firmware updater.
– Exit the firmware updater.
– Send a print job to the printer from any other computer on the net-
work.
The following procedure describes how to update the firmware for magicolor
5450. Follow the same procedure to update the firmware for magicolor
1650EN, magicolor 2550/2550DN, magicolor 5550/5570, magicolor 7450,
magicolor 7450II and bizhub C30P.
1
Download the firmware updater from the web site, and then decompress
it.
2
Double-click "5450Gxxxxxxxx".
Starting the Firmware Updater
19