Editing Or Erasing A Contact - Ecom Instruments Ex-CDMA 02 Safety Instructions

Adding a code or extension
When you save the phone number of an automated service, you may include
a pause where your phone would stop dialing; for example, where you would
wait to dial an extension.
. Enter the first portion of the phone number.
2. Press right to scroll through the options at the bottom of the screen.
3. Press to select a type of pause.
A Time Pause - Stops dialing for two seconds, then continues to dial.
-
A Hard Pause - Stops dialing until you select Release.
-
4. Enter the remaining numbers.
5. Select Save New.
Editing or erasing a contact
To make changes to a contact, take these steps.
(To erase all saved contacts, see page 50.)
. Select Menu ‡ Contacts.
2. Select View All or Find Name to find the contact you want to edit.
3. Highlight the contact to edit and press
4. Select Options.
5. Highlight an option and press
- Add New to add a number, address, or note.
- A ssign Ringer or Unassign Ringer to select or remove a ringer to
identify an incoming call from this contact.
- Assign Picture or Unassign Picture to select or remove a picture to
identify an incoming call from this contact.
- Erase Contact to erase the entire contact.
- Edit Name of the contact.
- Classify Contact as personal or business.
- Exit without making changes.
6. Enter the new information.
to select Save, if necessary.
7. Press
Editing a phone number
. Select Menu ‡ Contacts.
2. Select View All or Find Name to find the contact you want to edit.
3. Highlight the contact to edit and press
4. Press down to highlight the phone number you want to edit and
press .
5. Highlight an option for the phone number and press
.
to select it:
.
:
33