Yamaha DDK-7 Owner's Manual page 96

Reference Pages
Footswitches (page 200)
Foot Pedal (page 203)
6
96 DDK-7 Owner's Manual
Setting the Registration Shift mode in the Regist Shift
display
Connect the Pedal Unit (DDKU-P7) or optional Foot Pedal (FC4/FC5) to the
instrument.
If you want to use the Foot Pedal, set the desired parameters in the Regist Shift display
explained in this section, then assign the Regist Shift function to the Foot Pedal. Refer
to the section "Controlling Registration Shift" on page 210.
Setting the Registration Shift mode in the Regist Shift
display
1
Press the [FOOT SWITCH] button on the panel.
Press the [RIGHT] button at the top right of the display to call up
2
the RIGHT Page (Regist Shift display).
REGIST SHIFT Display
1
2
1
OFF
Turns off the Registration Shift assignment. When you select OFF, you cannot change
Registrations by using the Right Footswitch, or with an optional Foot Pedal.
2
SHIFT
In the Shift mode, each press of the Right Footswitch, or with an optional Foot Pedal
selects the Registration Memory presets in their numerical order. After the last
Registration is reached, the function 'wraps around' to select the first preset again. The
numbered buttons light up as they are selected.
DDKU-P7 FC4
3 4
FC5