Yamaha DDK-7 Owner's Manual page 48

4
Reference Page
Effect List (page 53)
Reference Page
Organ Flutes (page 38)
48 DDK-7 Owner's Manual
REVERB [Page 2]
1
1
TYPE
Determines the reverb type for each of the Voice sections and the Organ Flute Voice.
Several types can be selected: Room, Hall, Stage, and so on.
Pressing the TYPE button on the display calls up the Reverb Type list.
The list contains many reverb types, more than can fit on one display page. To change
the display pages, press the appropriate number buttons [1] or [2] in the display. Select
the desired reverb type in the list. After changing the reverb type, the TIME parameter
below is automatically changed corresponding to the selected reverb type.
2
TIME
Determines the reverb length for each of the Voice sections and the Organ Flute Voice.
Higher settings increase the reverberance.
Range: 0.3s – 30.0s
3
ORGAN
Determines the amount of reverb applied to the Organ Flute Voice. This parameter
corresponds to the REVERB slider contained in the ATTACK/VOLUME Page of the
Organ Flute display.
Range: 0 – 24
2 3
Press the number buttons to change the display pages.