Yamaha DDK-7 Owner's Manual page 50

Dual manual keyboard
Hide thumbs Also See for DDK-7:
Table of Contents

Advertisement

Reference Page
Foot Pedal (page 203)
4
SUSTAIN Display
Switches the sustain function on/off
Sustain length value
NOTE
If you change the Voice
when the sustain length is
set to HOLD and the keys
are released, the Voice only
changes after you play
another key.
NOTE
When the sustain length is
set to HOLD, previously
played note(s) may be cut
off by subsequently played
notes.
NOTE
The minimum setting results
in no sustain. Turning
sustain "OFF" automatically
resets the sustain length to
be the default setting.
50
DDK-7 Owner's Manual
Sustain
The sustain effect, selectable for the each Voice section, causes Voices to gradually fade
out when the keys are released. The sustain on/off and sustain length settings are
independent for each Voice section, providing maximum expressive control.
The optional Foot Pedal can also be used to switch sustain on/off for voice sections
other than Pedal Voice 1 and 2.
To add sustain to the Voices and call up the Sustain page:
Press the SUSTAIN button, located to the left of the panel, to set the sustain. The
Sustain display appears.
The Sustain display consists of two pages.
The display shows the on/off status and the current sustain length values for each Voice
section. The values here must be set high enough for the sustain effect to be noticeable.
Press the ON/OFF button in the display to select "ON" above the Voice section name
for which you want to apply sustain. To turn sustain off, press the same button a
second time to select "OFF".
To adjust the sustain length value, use the display sliders. If you set the highest value
(HOLD), some Voices such as organ or synth will sound continuously even when the
keys are released.
The lamp of the [SUSTAIN] button lights up when you turn on the Sustain effect for
one of the Voice sections in the Sustain display. When you turn off the Sustain effect
for all Voice sections in the Sustain display, the lamp turns off. Remember to check
whether the sustain effects are on or off in the Sustain display before you start to play.
Range: 0 – 12, HOLD

Advertisement

Table of Contents
loading

Table of Contents