Yamaha DDK-7 Owner's Manual page 60

Parameter
Level Offset
Filter Type
Resonance
Dry/Wet
4
DYNA RINGMOD
Parameter
Sensitivity
Threshold
Dry/Wet
RING MOD
Parameter
Frequency
Frequency
Fine
LFO Wave
LFO Depth
Dry/Wet
ISOLATOR
Parameter
On/Off
Low Mute
Middle Mute
High Mute
Low Level
Middle Level
High Level
60 DDK-7 Owner's Manual
Value Description
0 - 127 Determines the offset values
of the filter frequency. The
offset value affects the filter
frequency when no control
signals are received.
LPF (12 dB), Determines the filter type.
LPF (18 dB),
LPF (24 dB),
HPF, BPF, BEF
-16 - +111 The higher the value, the
more sharp the frequency
response curve is.
D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Value Description
0 - 127 Determines the modulation
sensitivity for the input
change.
0 - 127 Determines the input level at
which effect begins to be
applied.
D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Value Description
0.7 - 5002.6 Hz Determines the frequency for
the Amplitude Modulation.
0 - 127 Determines detailed
adjustment of the Amplitude
Modulation.
Triangle, Sine Selects a triangular wave or
sine wave as the wave for
modulation.
0 - 127 Determines the wave depth.
The higher the value, the
greater the effect.
D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Value Description
Off, On Determines the on/off status
for the effect.
Off, On Mute switch for the low
frequency range.
Off, On Mute switch for the mid
frequency range.
Off, On Mute switch for the high
frequency range.
0 - 127 Determines the level of the
low frequencies.
0 - 127 Determines the level of the
mid frequencies.
0 - 127 Determines the level of the
high frequencies.
THRU
Bypass control. This cancels the effect processing.
Effect Type
Thru