Table of Contents
Advertisement
Online Insertion and Removal (OIR)
Online Insertion and Removal (OIR)
The Online Insertion and Removal (OIR) feature is described in this section.
SA-VAM2+
Online insertion and removal (OIR) is supported on the SA-VAM2+. Before removing the SA-VAM2+,
we recommend that you shut down the interface so that there is no traffic running through the
SA-VAM2+ when it is removed. Removing a SA-VAM2+ while traffic is flowing through the ports can
cause system disruption.
Port Adapter Jacket Card
OIR on the Port Adapter Jacket Card is not supported; however, the SA-VAM2+ within the Port Adapter
Jacket Card does support OIR. You must have the chassis powered off to install or remove the Port
Adapter Jacket Card. See the
the Port Adapter Jacket Card.
Warnings and Cautions
Observe the following warnings and cautions when installing or removing VPN acceleration modules.
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
The safety cover is an integral part of the product. Do not operate the unit without the safety cover
installed. Operating the unit without the cover in place will invalidate the safety approvals and pose
a risk of fire and electrical hazards.
Before working on equipment that is connected to power lines, remove jewelry (including rings,
Warning
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals.
Keep hands and fingers out of the power supply bays. High voltage is present on the power backplane
when the system is running.
SA-VAM2+ Removal and Installation
This section describes how to remove and install the SA-VAM2+, and covers the following topics:
•
•
VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide
3-2
Port Adapter Jacket Card Installation Guide
Cisco 7200VXR Router Port Adapter Jacket Card, page 3-3
Cisco 7200VXR Series Routers, page 3-4
Chapter 3
Removing and Installing the SA-VAM2+
for more information about
OL-5979-03
Advertisement
Table of Contents
Need help?
Do you have a question about the SA-VAM - VPN Acceleration Module and is the answer not in the manual?
Questions and answers