Limitations And Restrictions; System Requirements - Cisco Aironet 340 Series Release Notes

System Requirements

You must have a 340 or 350 series access point or a 350 series bridge to install firmware version 12.01T1.
Version Supported
Your access point must be running firmware version 10.x or later to install firmware version 12.01T1.
Your bridge must be running version 11.07 or later to install firmware version 12.01T1.
Upgrading to a New Firmware Release
Determining the Firmware Version
The firmware version number is in the upper-left corner of most management screens in the web-browser
interface and at the top of the home (Summary Status) page in the command-line interface.
Upgrade Procedure
For instructions on installing access point and bridge firmware:
1.
2.
3.
To upgrade firmware from a file server, you must enter settings on the access point's or bridge's FTP
Note
Server Setup page. Refer to chapter 6 in the Cisco Aironet Access Point Software Configuration Guide
for more information.

Limitations and Restrictions

This section describes limitations and restrictions for 340 and 350 series access points and 350 series
bridges.
Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges Running Firmware Version 12.01T1
OL-3740-01
Follow this link to the Cisco Aironet documentation home page:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm
Follow this path to the product, document, and chapter:
Aironet 350 Series Wireless LAN Products > Cisco Aironet 350 Series Access Points > Cisco
Aironet Access Point Software Configuration Guide > Managing Firmware Configurations >
Updating Firmware
Follow this link to the Software Center on Cisco.com and download firmware version 12.01T1:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Limitations and Restrictions
3