Using Scan To Home - Konica Minolta bizhub 223 User Manual

How to Use the Authentication Unit
3.8.4

Using Scan To Home

The following explains how to use Scan To Home on the MFP.
!
Detail
If the correct settings are configured to use Scan To Home, [Home]
appears on the Fax/Scan screen to send data to the user's Home folder.
1
Press the [Fax/Scan] key on the control panel.
2
Press [Home].
3
Specify scan conditions in [Scan Settings], [Original Settings], and
[Communication Settings].
4
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's Home folder.
Note
For details on scan conditions, refer to the User's Guide [Network Scan/
Fax/Network Fax Operations] supplied together with the MFP.
AU-211P
3
57