Related Settings - Konica Minolta bizhub 223 User Manual

How to Use the Authentication Unit
3.4.2

Related Settings

This section explains how to configure the SMB TX settings on the MFP that
supports this system.
Client Settings
Configure the setting to perform SMB TX.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings].
Item
ON/OFF
SMB Authentication
Setting
User Authentication
(NTLM)
DFS Setting
AU-211P
Description
Select [ON].
Select the SMB TX authentication method.
When performing SMB TX for a folder accessible in the
Active Directory domain environment, select [Kerberos].
When performing SMB TX in the environment in which
the Active Directory and NT domains are used together,
select [Kerberos/NTLMv2/v1].
Select whether or not the NTLM user authentication is
performed.
To perform SMB TX in a DFS (Distributed File System)
environment, select [Enable].
3
32