Correcting The Mfp Time - Konica Minolta bizhub 223 User Manual

Getting Started
2.3.3

Correcting the MFP Time

You cannot log into Active Directory if the MFP system time is extremely
different between the MFP and Active Directory. Correct the MFP time so it
matches the Active Directory time with the system time.
Time Adjustment Setting
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [Forward] - [Detail Settings] -
[Time Adjustment Setting].
Page 1/2
Item
ON/OFF
Auto IPv6 Retrieval
Host Address
Port Number
Set Date
Page 2/2
Item
Auto Time Adjustment
Polling Interval
AU-211P
Description
Select [ON].
To automatically obtain the IPv6 address of the NTP
server, select [ON].
This item is necessary when IPv6 is used while DHCPv6
is enabled.
Specify the host address of the NTP server associated
with Active Directory.
Specify the port number.
Correct the time.
Description
When an automatic time correction is made, select
[ON].
When [ON] is selected for Auto Time Adjustment, set the
polling interval.
2
12