Konica Minolta bizhub 223 User Manual page 30

How to Use the Authentication Unit
When multiple LDAP servers are registered
1
Select the LDAP server to be the target for LDAP search.
– Multiple LDAP servers can be selected.
2
Press [OK].
Perform authentication using the Kerberos authentication ticket, and
connect to the LDAP server.
3
Select the desired method to search for the destination.
– You can check the authentication result of each server by pressing
the number key of a desired LDAP server.
– Press [Select Servers] to select the LDAP server to be searched
among the LDAP servers that have succeeded in authentication.
!
Detail
• When authentication has failed for all of the selected LDAP servers,
[Select Servers], [Search], and [Advanced Search] will not be displayed.
• If only one LDAP server has succeeded in authentication, [Select Servers]
will not appear.
AU-211P
3
29