Canon 2921B002 On-Screen Manual page 668

An Error Message Is Displayed on the LCD
An unsupported USB hub is connected.
Remove the hub.
B200
Printer error has occurred.
See the manual.
****
Printer error has occurred.
Turn off power then back on again.
If problem persists, see the manual.
Scanner is not operating correctly.
The card is currently writable from PC.
Set to [Not writable from PC].
If a PictBridge compliant device is connected via a USB hub,
remove the hub and connect it directly to the machine.
Turn off the machine, and unplug the power cord of the
machine from the power supply.
If the problem is not resolved, contact your Canon service
representative.
"****" is displayed in the alphanumeric character and
depends on the error occurred.
5100/5110 is displayed:
Cancel printing, and turn off the machine. Then clear the
paper jam or foreign object that is preventing the Print
Head Holder from moving.
Caution
Be careful not to touch the components inside the
machine. The machine may not print out properly if
you touch it.
Turn the machine back on.
If the problem is not resolved, contact your Canon service
representative.
In other cases:
Turn off the machine, and unplug the power cord of the
machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact your Canon service
representative.
Turn off the machine, and unplug the power cord of the
machine from the power supply.
After a while, plug the power cord of the machine back in,
and then turn on the machine. If the same error occurs,
contact your Canon service representative.
The Card Slot is set to Writable from USB PC or Writable
from LAN PC.
You cannot print from the memory card or save the scanned
data to the memory card when the Card Slot is set to
Writable from PC. After writing on the memory card, set to Not
writable from PC again.
Page 668 of 815 pages
Page top