Adjusting Tone Curve - Canon 2921B002 On-Screen Manual

Adjusting Tone Curve

>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Adjusting Tone Curve
Adjusting Tone Curve
In ScanGear's Advanced Mode, click
Channel
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These
colors can be adjusted individually as a "channel."
Master
Adjust the Red, Green and Blue combined.
Red
Adjust the Red channel.
Green
Adjust the Green channel.
Blue
Adjust the Blue channel.
Note
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
Reading Tone Curves
With ScanGear (scanner driver), scanning images via a scanner is the input, and displaying to a monitor
is the output. Tone Curve shows the balance of tone input and output for each Channel.
>
Scanning with Other Application Software
(Tone Curve Settings).
>
Correcting Images and Adjusting Colors with
Page 537 of 815 pages