Inside View - Canon 2921B002 On-Screen Manual

Main Components
(14)
USB Port
Plug in the USB cable to connect the machine with a computer.
Caution
Do not touch the metal casing.
Important
Do not plug in or unplug the USB cable while the machine is printing from or scanning
originals to the computer.
(15) Wired LAN Connector
Plug in the LAN cable to connect the machine to a LAN.
Caution
Do not touch the metal casing.
(16) Rear Cover
Detach to remove jammed paper.
(17) Power Cord Connector
Plug in the supplied power cord.

Inside View

(18) Ink lamp
Lights or flashes red to indicate the ink tank status.
Checking the Ink Status
See
(19)
Print Head Lock Lever
Locks the Print Head into place.
Important
Do not raise this lever after installing the Print Head.
(20) Print Head Holder
Install the Print Head.
(21) Scanning Unit (Cover)
Scans originals. Open it to replace ink tanks, to check ink lamps, or to remove jammed paper inside the
machine. When opening the Scanning Unit (Cover), lift it with the Document Cover closed.
(22)
Card Slot
Insert a memory card.
Inserting the Memory Card
See
Access lamp
(23)
Lights or flashes to indicate the memory card status.
.
.
Page 6 of 815 pages