Memory Card Security - Nokia E5-00 User Manual

170 Security and data management
Lock your device remotely
1 To enable remote locking, select
General Security
>
Enabled.
2 Enter the text message content. It can be 5-20 characters, and both upper and
lower case letters can be used.
3 Enter the same text again to verify it.
4 Enter the lock code.
5 To lock the device remotely, write the predefined text, and send it to your device
as a text message. To unlock your device, you need the lock code.

Memory card security

Select Menu Office
>
You can protect a memory card with a password to prevent unauthorized access.
To set a password, select
can be up to 8 characters long and is case-sensitive. The password is stored in your
device. You do not need to enter it again while you use the memory card on the
same device. If you use the memory card on another device, you are asked for the
password. Not all memory cards support password protection.
To remove the memory card password, select
password > Remove. When you remove the password, the data on the memory
card is not protected against unauthorized use.
To open a locked memory card, select
password.
If you cannot recall the password to unlock a locked memory card, you may reformat
the card, in which case the card is unlocked and password removed. Formatting a
memory card destroys all data stored on the card.
Menu
Phone and SIM card
>
File mgr..
>
Options Memory card password
>
Options
Ctrl. panel Settings
> >
Remote phone locking
>
Options Memory card
>
Unlock memory
>
and
>
> Set. The password
card. Enter the