Positioning Settings - Nokia E5-00 User Manual

Route guidance uses a rotating compass on the device display. A red ball shows the
direction to the destination, and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route and the shortest distance
to the destination, measured in a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences in altitude are not taken
into account when calculating the distance. Route guidance is active only when you
move.
To set your trip destination, select
the destination, or enter the latitude and longitude coordinates.
To clear the destination set for your trip, select
Trip meter
Select Menu Applications
>
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can
also be affected by availability and quality of GPS signals.
To turn trip distance calculation on or off, select
calculated values remain on the display. Use this feature outdoors to receive a better
GPS signal.
To set the trip distance and time and average and maximum speeds to zero, and to
start a new calculation, select
to zero, select Restart.

Positioning settings

Select Menu Ctrl. panel
>
Options
Location
> >
Options > Reset. To set the trip meter and total time
Settings and General
>
Positioning (GPS) 119
Set destination
>
Stop navigation.
GPS data and Trip
Options Start
>
> Positioning.
and a landmark as
distance.
or Stop. The