Nokia E5-00 User Manual page 197

Use access point — Select
confirmation before the connection using this access point is created, or
Automatically if you want the device to connect to the destination using this access
point automatically.
Select Options
>
Network type — Select the internet protocol type to transfer data to and from
your device. The other settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of your device.
DNS addresses — Enter the IP addresses of the primary and secondary DNS servers,
if required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy server.
Proxy port number — Enter the port number of the proxy server.
Wi-Fi internet access points
Select . Menu
>
point, and follow the instructions on the display. Or, open one of the access point
groups, select an access point marked with
Use the instructions provided by your service provider to edit the following:
Connection name — Define a name for the connection.
Data bearer — You might not be able to edit the data bearer once defined. Define
a new access point if needed.
WLAN network name — Select
select an existing network,
determined by the settings of its access point device.
Network status — Define whether the network name is displayed.
After confirmation
Advanced settings
Ctrl. panel Settings
>
WLAN network mode
if you want the device to ask for
and from the following:
and Connection
, and select
Enter manually
Destinations
>
Options
or Search for networks. If you
and WLAN security mode
Settings 197
Access
>
> Edit.
are