Security And Data Management; Lock The Device; Memory Card Security - Nokia RM-482 User Manual

Security and data management

Manage the data and software on your device, and take care
of the security of the device and its contents.
Important: Your device can only support one antivirus
application. Having more than one application with antivirus
functionality could affect performance and operation or
cause the device to stop functioning.

Lock the device

The lock code protects your device against unauthorised use.
The preset code is 12345.
To lock the device, in the home screen, press the power key,
and select Lock phone.
To unlock your device, select Unlock, enter the lock code, and
select OK.
To change the lock code, select Menu Ctrl. panel
>
Settings and General Security Phone and SIM
> >
Enter the old code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and digits
can be used, and both uppercase and lowercase alphabets
are possible.
Keep the new lock code secret and separate from your device.
If you lose the lock code, you must take the device to a Nokia
authorised service facility. To unlock the device, the software
must be reloaded, and the data you have saved in the device
may be lost.
Cyan Cyan
You can also lock the device remotely by sending a text
message to the device. To enable remote locking, and to
define the text for the message, select
panel Settings and General
>
SIM card Remote phone locking
>
remote lock message, and confirm the message. The message
must be at least 5 characters long.

Memory card security

Select Menu Office File
> >
You can protect a memory card with a password to prevent
unauthorised access. To set a password, select
Memory card password > Set. The password can be up to
8 characters long and is case-sensitive. The password is
stored in your device. You do not need to enter it again while
you use the memory card on the same device. If you use the
memory card on another device, you are asked for the
>
password. Not all memory cards support password
card.
protection.
To remove the memory card password, select
Memory card password > Remove. When you remove the
password, the data on the memory card is not protected
against unauthorised use.
To open a locked memory card, select
memory card. Enter the password.
If you cannot recall the password to unlock a locked memory
card, you may reformat the card, in which case the card is
Magenta Magenta Yellow Yellow Black Black
Menu Ctrl.
>
Security Phone and
> >
> Enabled. Enter the
mgr..
Options
>
Options
>
Options Unlock
>