Technical Data - Whirlpool ACE 102 IX Instructions For Use Manual

PROBLEM
The milk contains large
bubbles or spurts out of the
milk spout

TECHNICAL DATA

Voltage:
Absorbed power:
Pressure:
Water tank capacity:
Size (L x H x W):
Weight:
POSSIBLE CAUSE
• The milk is not cold enough or is
not semi-skimmed.
• The milk frother pointer is
incorrectly adjusted.
• The milk container lid is dirty.
220-240 V~ 50/60 Hz max. 10A
1350W
15 bar
1.8 litres
595 x 455 x 398 mm
26 kg
GB41
REMEDY
• Ideally, use skimmed milk at
refrigerator temperature, or semi-
skimmed milk at refrigerator
temperature (about 5°C). If results are
still not satisfactory, try changing brand
of milk.
• Move the pointer slightly towards the
word (see chapter
• Clean the milk container lid as
described in paragraph
.
).