Drainage System - Whirlpool AZB 7570 Instructions For Use Manual

DRAINAGE SYSTEM

For your convenience:
The dryer can be connected directly to the sewage
system of the house to avoid having to empty the
water container after each drying cycle.
Place an absorbent cloth underneath to collect water
spillage.
A. Unplug the hose located at the upper rear part of the
dryer.
A
B. Remove the hose from the rear protective cover.
B
10
C. Connect the hose to the sewage system. The height
difference between the floor where the dryer is
positioned and the sewage system connection should
not exceed 1 m.
C
Notice: To prevent water siphoning back into the
appliance, the end of the hose must not be immersed in
the drain water. Avoid bending and twisting the hose.