Troubleshooting Guide/ After-Sales Service - Whirlpool AZB 7570 Instructions For Use Manual

TROUBLESHOOTING GUIDE/
AFTER-SALES SERVICE
In the event that the dryer malfunctions, one of the following failure codes may be displayed.
Depending on the model of your dryer, the failure may be displayed in letters or by different
blinking LEDs.
Failure code LED failure code
F01
F02
F03
F04
F05
F06
F07
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F10 - 15
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it. If the failure reoccurs,
F18
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F19
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it. If the failure reoccurs,
F20
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F21
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F22
please call the After-Sales Service.
Start LED blinks
Make sure that the door is correctly closed and the heat exchanger correctly positioned. If the failure reoccurs,
2 times per
second when
please call the After-Sales Service.
pressed
Heat exchanger
Make sure that the heat exchanger is correctly positioned. If the failure reoccurs, please call the After-Sales
LED blinks 2
times when Start
Service.
button is pressed
LED not blinking
12
Check to be carried out by customer before service call
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Please call the After-Sales Service.
LED blinking