Troubleshooting Guide; After Sales Service - Whirlpool AFB 910/IS Instructions For Use Manual

Undercounter 3 door freezer in silver afb 910/is
Table of Contents

Advertisement

60202011GB.fm Page 21 Thursday, July 12, 2007 5:31 PM

TROUBLESHOOTING GUIDE

1. The appliance does not work.
•Is there a power failure?
•Is the main switch turned on?
•Are the household electrical system
protection devices efficient?
•Is the thermostat correctly set?
•Was the appliance switched on correctly?
2. Excessive frost build-up.
•Is the defrost water drain correctly
positioned?
•Was the door properly shut?
AFTER-SALES SERVICE
Before contacting the After-Sales Service:
1. See if you can solve the problems on your own
(see "Troubleshooting guide").
2. Switch the appliance on again to see if the
problem has been eliminated. If it has not,
disconnect the appliance again and repeat the
operation after one hour.
3. If the problem persists, contact the After-Sales
Service.
Notes:
• If the front edge of the appliance is hot, this
is not a defect but prevents the formation of
condensate.
• Gurgling and hissing noises due to
expansion in the refrigerant circuit are
normal.
Specify:
•the type of fault,
•the model,
•the Service number (the number after the
word SERVICE on the rating plate inside the
appliance),
•your full address,
•your telephone number and area code.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

910/is

Table of Contents