Audio; Drc (Dynamic Range Compression); Audio Sync; Hdmi Audio - Samsung HT-D423H User Manual

DRC (Dynamic Range Compression)

This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
•
You can select either Full, 6/8, 4/8, 2/8, off.

AUDIO SYNC

Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
•
You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.

HDMI AUDIO

The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
•
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
•
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
✎
NOTE

The default setting of this function is HDMI Audio Off.

HDMI Audio is automatically down-mixed to 2ch for
TV speakers.

When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.

With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.
HT-D423H-XU-ENG-1228.indd 23 HT-D423H-XU-ENG-1228.indd 23

Audio

User EQ

You can confi gure the equalizer settings manually to
your preference.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz 3kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
✎
NOTE

This can be also done using the DSP/EQ button.
(see page 31)

Audio Return Ch.

You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
•
Off : Turn the Audio Return Channel function off.
•
Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
✎
NOTE

When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.

Using an ARC (Audio Return Channel)-
uncertifi ed HDMI cable may cause a problem in
compatibility.

ARC function is only available if an ARC-
compliant TV is connected.

System

Initial Settings

By using the Initial Settings, you can set the language
and TV aspect.
✎
NOTE

If the HDMI cable is connected to the product,
TV aspect does not appear and it is set to 16:9
Wide automatically.
6kHz 10kHz 15kHz
23
English
2011-12-28 2011-12-28 4:18:10 4:18:10