Connecting Audio From External Components - Samsung HT-X200 Instruction Manual

Connecting Audio from External Components
AUX1 : Side Panel AUX2 : Rear Panel
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right._
f
J
AUX1 • Connecting an External Component/MP3 player
1 Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2 Press the AUX button on the remote control to select <AUXl> input.
• Youcan also use the FUNCTION button on the main unit.
The mode switches as follows : DVD -_ D.IN -_ AUX 1 -* AUX 2 -* USB -_ FM.
AUX2 • Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
• Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.
• Youcan also use the FUNCTION button on the main unit.
The mode switches as follows : DVD -* D.IN -* AUX 1 -_ AUX 2 -_ USB -* FM.
• Youcan connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Rear Panel
_ Optical Cable "'I
(n°!supP!ied! J
OPTICAL • Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2 Press the AUX button on the remote control to select <D.IN>.
• You can also use the FUNCTION button en the main unit.
The mode switches as follows : DVD -_ D.IN -* AUX 1 -_ AUX 2 -* USB -* FM.
18 19