Connecting Audio From External Components - Samsung HT-D7500W User Manual

Connections

Connecting audio from external Components

Audio Cable (not supplied)
If the external analogue
component has only one
Audio Out, connect either left
or right.
VCR
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select D. IN input.
The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. iPod ; W. iPod ; HDMI1 ; HDMI2 ; TUNER
•
✎
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
1.
Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.
Be sure to match connector colors.
•
2. Press the FUNCTION button to select AUX input.
The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. iPod ; W. iPod ; HDMI1 ; HDMI2 ; TUNER
•
✎
NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of
the VCR to this product.

English
HDMI OUT HDMI OUT HDMI IN 1 HDMI IN 1
SYSTEM CABLE SYSTEM CABLE
White AUX IN
SPEAKER IMPEDANCE : 3 SPEAKER IMPEDANCE : 3 SPEAKER IMPEDANCE : 3
DIGITAL DIGITAL
ONLY FOR ONLY FOR
UPDATE UPDATE AUDIO IN
(OPTICAL)
FM ANT FM ANT
Red
Optical Cable
(not supplied)
Set-Top Box
AUX OPTICAL
WIRELESS WIRELESS
HDMI IN 2 HDMI IN 2
SPEAKERS OUT SPEAKERS OUT
FRONT FRONT FRONT FRONT
ASC IN ASC IN
CENTER CENTER