Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
MANUAL CLEANING
You can move the robotic vacuum cleaner to clean a
particular location directly by using the remote control.
Move the robotic vacuum cleaner to the location where you want
■
to perform manual cleaning.
You can manually clean using the remote control only.
■
Main unit button
▶
4time
●
When the robotic vacuum cleaner is docked with the
charger station, manual cleaning is not supported.
NOTE
●
When you press the Turbo remote control button, either On
turbo (
CAUTION
the display panel in turns. When On turbo is displayed, you
can clean the floor in Turbo Mode.
●
When you press the Edge remote control button, On Edge
(
display panel in turns. When On Edge is displayed, you can
clean the floor in Edge Mode.
●
If you select both Turbo Mode and Edge Mode at the same
time, the (
turns.
Remote control button
) or Off turbo (
) or Off Edge (
) is display on the display panel in
→
Directional Buttons (Forwards, Left, Right)
A backwards function is not supported.
Configuration Sequence
1
Set the mode.
2
Cancel the mode.
) is displayed on
) is displayed on the
Operating the cleaner _33
Normal Mode
Turbo Mode
Edge Mode